Brocade Switches
Filters
129 products
Used and refurbished Brocade switches and routers, each listed with its part number, condition and price. The range runs from ICX stackable switches (the maker's documents call them RUCKUS ICX) and VDX data center switches to MLXe router chassis and modules, NetIron CES and CER, FastIron SX modules, Fibre Channel SAN switches and load balancers. Each family page opens one series with the maker's figures beside the listings.
How we test used Brocade hardware
Each unit is logged by serial number and inspected: chassis, ports, fans, power supplies and optics cages. It then runs under power long enough to surface early failures, with power supply output, fans and temperatures checked under sustained load. Our technicians test every port and module slot for link at rated speed, clean error counters and a reachable management interface. The previous owner's configuration is erased and the unit is returned to a clean factory state, then it is checked again before it is packed. The condition on each listing is the grade our bench assigned. The full procedure is on the testing process page.
Warranty and returns
The Townsend 3-Year Warranty covers hardware failure in normal use for 3 years from the date of delivery, including ports, power supplies, fans, backplanes and module slots. If a unit fails, we repair it or replace it with an equivalent tested unit. Unused hardware in the condition it shipped can be returned within 30 days of delivery for a refund; contact us for an RMA number before shipping anything back. We are an independent reseller, so the warranty is our own and Brocade software licensing and support contracts are outside it. Read the 3-year warranty and RMA terms and the refund policy.
Prices and quotes
Every listing shows its price, and you can buy at that price through checkout. Prices differ by model, port count, feature set and condition, so sort this page by price or open a family page below to compare like with like. For several units, a mixed list or a Brocade part number you do not see here, send part numbers and quantities through request a quote: a firm price comes back, typically the same business day. We accept major credit cards, ACH and wire transfer, and net terms are available for qualified businesses.
Brocade families we list
- ICX switches: from the ICX 7150 to the ICX 7850, each stacking up to 12 switches: the ICX 7150 and ICX 7250 with 480 Gb/s of stack bandwidth, the ICX 7450 with 960 Gb/s, the ICX 7650 with 2400 Gb/s, the ICX 7750 with 5760 Gb/s and the ICX 7850 with 9.6 Tbps. Switching capacity runs from 180 Gbps on a 48 port ICX 7150 to 4.0 Tbps on the ICX7850-48F-E2. Sources: RUCKUS ICX 7150-48P, RUCKUS ICX Switch Family Data Sheet, RUCKUS ICX 7850 Switch Data Sheet.
- VDX switches: the 1U VDX 6740 has 48 1/10 GbE SFP+ ports and 4 40 GbE QSFP+ ports, with 1.28 Tbps and 850 ns latency; the VDX 6740T is its copper version, with 48 10GBASE-T ports and 3 microseconds of latency. The VDX 6940-36Q has 36 40 GbE QSFP+ ports in 1U, and the 2U VDX 6940-144S has 96 10 GbE SFP+ and 12 40 GbE QSFP+ ports. Sources: ExtremeSwitching VDX 6740 Technical Specifications, ExtremeSwitching VDX 6940 Technical Specifications.
- MLXe routers: chassis routers in 4, 8, 16 and 32 slot sizes. The MLXe-4 is 5U, the MLXe-8 7U and the MLXe-16 14U; the 4 and 8 slot chassis take four 1200 W or 1800 W AC or DC power supplies and the 16 slot chassis eight, with 1+1 redundancy. Sources: ExtremeRouting MLX Series Technical Specifications, Extreme Routing MLX Series Hardware Installation Guide.
- NetIron CES and CER: 1U switches and routers. The 2024C models have 24 10/100/1000 RJ45 ports and 4 100/1000 SFP combination ports, and the NI-CER-2048CX has 48 RJ45 ports and 2 10 GbE XFP ports. Each has an internal AC or DC power supply in 1+1 redundancy and front to back airflow. Sources: ExtremeSwitching CES 2000 and ExtremeRouting CER 2000 Series Hardware Installation Guide, ExtremeSwitching CES and ExtremeRouting CER 2000 Series Technical Specifications.
- FastIron SX modules: interface modules for the FastIron SX 800 and SX 1600 chassis in three generations, among them the SX-FI-24GPP with 24 10/100/1000 ports, PoE/PoE+ and MACsec, and the SX-FI-8XG with 8 SFP+ 10 GbE ports. Source: Brocade FastIron 08.0.30 Administration Guide.
- SAN switches: the 24 port Brocade 6510 and the 96 port Brocade 6520, both with 16G SWL SFPs, AC power and port side exhaust. Brocade gives June 17, 2025 as the 6510 end of support and September 21, 2027 as the 6520 end of support. Sources: Brocade 6510 Switch EOL Notice, Brocade 6520 Switch EOL Notice.
Other Brocade parts on this page include MLXe 10GbE and 100GbE modules, NI-X and NIBI power supplies and fabrics, ICX 6450, 6610 and 6650 switches, load balancers and optics.
Questions about used Brocade equipment
What do F and R mean at the end of a Brocade VDX part number?
They name the exhaust side. F models exhaust at the non-port side and R models at the port side. Sources: ExtremeSwitching VDX 6740 Technical Specifications, ExtremeSwitching VDX 6940 Technical Specifications.
How many ports does a VDX 6740 enable out of the box?
Base models enable 24 ports. Upgrade licenses bring the count to 48, or 64 with the QSFP+ ports broken out into 10 GbE. Source: ExtremeSwitching VDX 6740 Technical Specifications.
Are the ICX 7250, 7450, 7650 and 7750 still sold?
RUCKUS gives February 7, 2022 as the end of sale date for the ICX 7250, December 31, 2023 for the ICX 7650 and ICX 7750, and lists the ICX 7450 as discontinued on November 14, 2024. Sources: RUCKUS End of Sale Announcement for ICX7250 (document 4129), End of Sale Announcement for RUCKUS ICX 7650, End of Sale Announcement for RUCKUS ICX 7750 (document 4535), RUCKUS ICX 7450-48.
Are the Brocade 6510 and 6520 SAN switches still supported?
Brocade gives June 17, 2025 as the 6510 end of support and September 21, 2027 as the 6520 end of support, and names the Brocade G620 and G630 as the models that follow them. Sources: Brocade 6510 Switch EOL Notice, Brocade 6520 Switch EOL Notice.
Does used Brocade hardware come with a licence or a Brocade support contract?
Our warranty covers the hardware. Software licensing and Brocade support contracts are outside it, because we are an independent reseller and the warranty is our own. If the software level matters to your deployment, ask before you order.
How fast do Brocade orders ship?
Orders placed by 12pm ship the same business day, per our shipping policy. Overnight shipping is available across the US, and worldwide delivery is available on request.
Do you buy used Brocade equipment?
Yes. We buy Brocade switches, routers, modules and optics; send your list through sell your gear.
FAQs
Have a question ? We are here to help.
Use this text to share information about your product or shipping policies.
Do you ship overseas?
Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.
How long will it take to get my orders?
It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.
Any question?
You can contact us through our contact page! We will be happy to assist you.